The Double Sheet Bend is the secure version of the classic Sheet Bend.
It has an extra wrap around the bight alongside the first wrap for added security.
This knot does not increase the strength much, but it does make things more secure.
It’s used when you need to join ropes with marked differences in the diameter or rigidity.
Let’s learn it in detail.
How to Tie the Double Sheet Bend Knot Step by Step
- Pass the thin rope through the thick rope.
- Wrap it around the bight and feed it under itself.
- Now, do the same wrap again—repeat step 2.
- Tighten it by holding the thick rope and pulling the thin rope.
Note: Make sure the working ends of the rope land on the same side of the knot.
If they end up on the opposite side, it may result in the Left-hand version of the Double Sheet Bend, which is weaker.
Double Sheet Bend Details
Type: Bend Knot
Other Names: Double Becket Bend
ABoK Reference: #1434
Another Variation of the Double Sheet Bend
In Ashley’s words, “The Double Sheet Bend may be more quickly made in this way, since it has one less tuck.”
It’s listed under ABoK #1435.
Pros & Cons
- Simple and easy to tie
- Increase the security of the Sheet bend
- Does not jam
- Still not as secure as other bends and for critical applications.
Application and Uses
The Double Sheet Bend is particularly useful for joining ropes of unequal sizes when security is important.
You can use this knot for:
- Boating and sailing: Join the thin heaving line to the thick mooring rope
- Camping and outdoor activities: Hang up hammock with ropes of different sizes
Better Alternative? The Zeppelin Bend
If security is important, it’s best to stick to the Zeppelin Bend.
It’s stronger than the sheet bend in terms of strength, and the perfect symmetry makes it easy to inspect as well.
This knot is jam-resistant, so it’s easy to untie it even when wet.
- Further Reading: 10 Best Knots to Join Two Ropes Together
Liked the article? Don’t forget to Bookmark it or share it with family and friends!
