The Marlinspike Hitch is a temporary knot that turns your rope into a handle. Sounds interesting, right?
Here’s how it works: tie the knot, slide a stick or rod inside it, and you have got a handle.
It’s named after Marlinspike, a tool sailors used for this purpose. But it could be a rod, a cylindrical object, or a stick.
Let’s learn it in detail.
Marlinspike Hitch Details
Type: Hitches
Other Names: Boat Knot, Marlingspike Hitch
ABoK Reference: #7, #559, #1186, #2030
How to Tie the Marlinspike Hitch Knot
- Make a loop in the rope.
- Bring the loop to the right so that it crosses the vertical strand.
- Pull the middle strand to the left.
- Pass a cylindrical object through the loop.
- Tighten the knot.
To untie this knot, just remove the object, and the knot will come undone easily.
Marlinspike Hitch Step by Step
Common Mistakes
This is where people mess up with this knot—loading the hitch from the wrong side.
Always load this hitch from the standing side and not the working side. Otherwise, it will capsize into an Overhand Noose.
Pros & Cons
- Quick and easy to tie.
- Easy to untie.
- Practical and versatile.
- Unstable when not loaded.
- Can capsize and jam when not loaded properly.
Application and Uses
- Make handles to tighten other knots, particularly the Constrictor knot.
- Make a makeshift ladder.
- Used in the hammock suspension system and whoopie slings.
How to Make a Marlinspike Ladder
Now let’s put the Marlinspike Hitch to work by making a makeshift ladder.
The Marlinspike Hitch knot grips a pole to take the weight which allows you to use the multiple knots to create a ladder.
- Make the Marlinspike Hitch as shown above.
- Feed the object through the loop.
- Take a second rope and feed the other end of the object through the loop.
- Repeat the steps to make a step ladder.
Make sure you take care of the following things:
- Always use the standing part to take the load. If you use the working end, it will turn into a Noose.
- Each rung should be horizontal to minimize the risk of the knot sliding off the rung.
- Always inspect the ladder after it has not been in use for long. Check for weakened rugs and loose hitches.
- Use the correct end as the top end and maintain a proper level.
Liked the article? Share it or Bookmark it for future reference!
